Updating firmware on magic jack

If there is no included bootmonitor file, or you are using NMC1, upgrade the AOS first. (XXX being the version number downloaded) Tip: With Windows Command Prompt in most OS versions, besides Vista, command prompt, you can drag and drop the file onto the command prompt window which will paste the full file path automatically here for you. In Step 6, substitute the sumx module file name, in place of the AOS module file name. Failure to do so may result in unexpected operation of your AP9635 Network Management Card 2.

Cause Users may wish to upgrade their firmware to take advantage of enhancements, bug fixes, or new features.Go to the XMODEM or Manual sections below for additional instructions. Select TFTP, FTP, or XMODEM from the menu and follow the onscreen instructions. Configure the terminal session to 2400bps, no parity, 8 data bits, 1 stop bit, and no flow control. If there is no included bootmonitor file, upgrade the AOS binary first. To install the application module, repeat step 5 and step 6. If the Management Card is installed in an Expansion Chassis or Triple Expansion Chassis, connect the provided configuration cable (APC part number 940-0299) to the serial port at the Management Card, or connect an RS-232 configuration cable (APC part number 940-0024) to the DB-9 serial port at the expansion chassis. Identify and locate the firmware modules described in the preceding instructions for FTP. Use an SCP command line to transfer the AOS firmware module to the Management Card., which are not typically recommended, you will need to choose a new method. Unfortunately, loading applications for different devices may also have encounter this block if AOS versions are not the same. ***For AP9617/18/19 cards that have AOS 1.2.0 firmware and below, you will need to first upgrade to AOS 2.0.2 before upgrading to the latest firmware. If you are using Hyper Terminal, select Call- key several times. If you do not see the prompt, make sure that you have the proper cable and that the communication settings are correct. Enter the Administrator account User Name and Password. If you have changed the Administrator User Name and Password, use the new settings to log in. If you connect an RS-232 configuration cable (APC part number 940-0024) to the DB-9 serial port of the expansion chassis, select 115200 bps. The following example uses xxx to represent the version number of the AOS module: *To upgrade multiple Management Cards using an FTP client or using SCP, write a script which automatically performs the procedure.It claims having sold over 10 million units since product launch.MJ/YMAX has merged with Vocal Tec Ltd as of July 2010.

Leave a Reply