Updating old china cabinets Xxx chat in chennai
There are a few types, including a wipe-on paste, that people like.
Everyone seems to agree on one point though: do not use an oil based top-coat.
You aren’t really sanding, you are just lightly scratching the surface to give the primer a better finish to adhere to.
My step-by-step guide will walk you through the process of giving old furniture new life with a can of paint and a few other handy tools. The most useful site that I found was Centsational Girl.
Lots of the women paint and then sell furniture in shops, so they do it for a living. Zinsser Cover Stain oil-based primer Floetrol paint conditioner paint thinner Elmer’s wood filler good quality two-inch angled brush (mine is a Purdy brush) fine-grit sanding block, medium-grit sanding block, coarse-grit sanding block paint of your choice Minwax water-based Polycrylic (Varathane water-based polyurethane was also an acceptable choice) screw driver tack cloth or lint free rag for wiping and dusting Remove all of the doors and hardware using a screwdriver.
I decided that I didn’t want the doors on top at all, so I removed them and then used a Sawzall to cut the two vertical boards that the doors were attached to.
One of the big reasons for the research was because I was not going to sand the entire thing down to the wood.
I read lots and lots and went with a method that involved very little sanding.